Mackie CFX12 MK II Live Mixers

Mackie CFX12 MK II

12 CHANNELS OF MACKIE MIXING WITH SUPERB BUILT-IN EFFECTS
Designed to take the hassle out of mixing live performances, Mackie's CFX.mkII Series compact live sound mixers feature genuine Mackie mic preamps, four subgroups, precise nine-band stereo graphic equalizers for greater sonic control, and onboard EMAC™ 32-bit digital effects—eliminating the need for outboard effects processors and cables. Combined with Mackie Active loudspeakers, the CFX.mkII mixers are part of a complete, easy-to-use Mackie sound system. 

• THE FEATURES YOU NEED TO GET THE JOB DONE 
• NOT JUST ANY OLD EFFECTS
• TOUGH ENOUGH FOR LIVE

Features

• High-headroom mic preamps with RF rejection    
• 12 channels (8 mic/line mono, and 2 stereo line channels)    
• 32-bit EMAC™ digital effects with 9 reverbs, 4 delays, phaser, chorus, flange; 2 parameter controls + EFX wide spatial expander
• External and internal EFX sends    
• EFX to Monitor control    
• 9-band stereo graphic equalizer    
• Inserts on all mic channels and main mix    
• True 4-bus design with direct sub outs and L/R assign    
• 2 Pre/Post Aux sends and internal/external FX level sends on each channel    
• 3-band EQ with swept mid (100Hz to 8kHZ) on mic/line channels    
• 4-band EQ on stereo line channels    
• Pan, Mute, PFL solo on each channel    
• Inserts and 100Hz low-cut filters on all mic/line channels    
• Subwoofer output from built-in 18dB/oct. 75Hz crossover    
• Ingenious BREAK switch    
• Headphone output with level control    
• Tape/CD inputs with level control assignable to Main Mix via Break switch    
• Logarithmic taper 60mm faders    
• 48V phantom power    
• 12V BNC lamp jack

DBX DriveRack® 4820 Loudspeaker Management System

 

DriveRack® 4820

Loudspeaker Management System

Designed to provide incredible flexibility, sonic excellence and intuitive control for performance applications, the DriveRack 4820 is the next member of the hugely successful of the hugely successful DriveRack family. From the powerful 96 kHz DSP engine and standard analog and digital I/O, to the tamper-proof front panel, the 4820 provides all the processing, flexibility and control necessary for permanent installations.

The DriveRack 4820 is the next generation of the famous DriveRack family, and like its predecessor it is engineered to provide “Everything you need between the mixer and the power amps”. In keeping with this philosophy the 4820 includes four inputs and eight outputs with both analog and digital connectivity. The 96 kHz processing engine is capable of offering insert processing functions to customize the processing path for your application, in addition to the standard system processing functions all with extremely low latency and extended frequency response. From Signal Routing, EQ, and Bandpass Filters, to classic dbx® Dynamics and Feedback Suppression all the processing is available and with the sonic excellence that you would expect from the world’s leading system processing manufacturer. With all this processing power available, control is of paramount importance. The DriveRack 4820 provides a tamper-proof front panel, and is controlled by an easy-to-use GUI with optional wall panel controllers; so whether you application is Front of House system processing or Distributed system control, the DriveRack 4820 has what it takes.

• 48 and 96 kHz operation
• 4 analog and AES/EBU inputs
• 8 analog and AES/EBU outputs

DBX DriveRack® PX Powered Speaker Optimizer

• Stereo Feedback Elimination with 12 feedback notch filters
• Dual 28-band Graphic EQ
• Classic dbx® Compressor
• 120A Subharmonic Synthesizer
• Stereo Multi-band Parametric EQ
• Stereo PeakPlus™ Limiters
• Pink Noise Generator
• Auto-EQ with 28-Band RTA
• JBL® and other popular powered speakers included in Setup Wizard
• dbx M2 Measurement Mic and zippered pouch included
• Front panel RTA-Mic XLR input with phantom power
• 25 User Programs / 25 Factory Programs
• 2 Channel XLR Input
• 2 Channel XLR Output
• 2 Channel XLR Sub Output
• 24-Bit ADC/24-Bit DAC, >110 dB Dynamic Range
• dbx Type IV™ Conversion System
• Full Graphic LCD Display

 

 

DBX 1231 Dual Chanel 31-Band Equalizer

1231

Dual Chanel 31-Band Equalizer

The dbx® 12 Series were designed to meet the needs of the most demanding sound reinforcement environments, while offering the simplicity of straightforward controls. The 1231 provides standard features like dual-channels, 31 1/3 octave bands, ISO frequency centers, +/- 12 dB input gain range, and switchable 40Hz/18 dB per octave low-cut filters, but also includes other insightful features. These include 45 mm faders; selectable +/-6dB or +/-15dB boost/cut range for precise gain adjustments; XLR, barrier strip, and 1/4” TRS connectors for installation ease; balanced inputs and outputs for quiet operation; and chassis/signal ground lift capabilities for quick hum isolation. The visionary design of the dbx 12 Series makes your job easier.

The dbx 12 Series Equalizers were precision engineered to provide years of maintenance-free operation in any application. The magnetically isolated transformer, electronically balanced/unbalanced inputs and servo balanced/unbalanced outputs, RF-filtered inputs and outputs, and power-off hard-wire relay bypass with 2 second power up delay were steps our engineers took to ensure compatibility for all installations. Only the best components were utilized, yielding a 10Hz to 50kHz frequency response, greater than 90dB SNR (ref +4dBu), less than 0.005% THD +Noise (1kHz at +4dBu), and interchannel crosstalk of less than -80dB from 20Hz to 20kHz. All this attention to detail is contained in a 3U steel/aluminum chassis.

• Switchable boost/cut ranges of ±6 or ±15 dB
• Electronically balanced/unbalanced inputs
• Servo balanced/unbalanced outputs
• RF filtered inputs and outputs
• XLR, Barrier Strip, and 1/4″ TRS connectors
• -12dB/+12dB input gain range
• 18dB/octave 40Hz Bessel low-cut filter
• Chassis/signal ground lift capability
• Internal power supply transformer
• Power-off hardwire relay bypass with 2-second power-up delay

Behringer VIRTUALIZER 3D FX2000

VIRTUALIZER 3D FX2000

High-Performance 3D Multi-Engine Effects Processor

• 71 breathtaking new algorithms—true RSM (Real Sound Modeling) stereo and 3D effects
• Wave-adaptive virtual Room reverb algorithms for natural reverb and delay
• Awesome modulation, dynamic, psychoacoustic and EQ algorithms
• Authentic amp simulation, distortion and special effects
• 11 effect combinations with selectable serial / parallel configuration
• Up to 7 adjustable parameters plus 2-band EQ per effect
• 24-bit A/D and D/A converters with 64/128-times oversampling
• True stereo processing for realistic channel separation in stereo image
• 100 factory presets plus 100 user memory locations
• Extensive MIDI implementation
• Accurate LED level meters for perfect level setting and optimum performance
• Servo-balanced XLR and ¼” TRS inputs and outputs
• High-quality components and exceptionally rugged construction ensure long life
• Conceived and designed by BEHRINGER Germany

Behringer EUROPOWER EPX4000

EUROPOWER EPX4000

Professional 4000-Watt Lightweight Stereo Power Amplifier with ATR (Accelerated Transient Response) Technology

• 2 x 2000 Watts into 2 Ohms; 2 x 1200 Watts into 4 Ohms; 4000 Watts into 4 Ohms (bridge mode)
• ATR (Accelerated Transient Response) technology for ultimate punch and clarity
• Ultra-light, ultra-low noise and ultra-efficient switch-mode power supply for noise-free audio, superior transient response and low power consumption
• Switchable limiters offer maximum output level with reliable overload protection
• Detented gain controls for precise setting and matching of sensitivity
• Precise Power, Signal and Limit LEDs to monitor performance
• XLR , 1/4'' TRS and RCA input connectors for compatibility with any source
• Professional speaker connectors and ''touch-proof'' binding posts support most speaker wiring systems
• Built-in Subwoofer/Satellite crossover for more flexibility
• Independent DC and thermal overload protection on each channel automatically protects amplifier and speakers without shutting down the show
• “Back-to-front” ventilation system including air filter for reliable operation
• ''Built-like-a-tank'', impact-resistant, all-steel 2U rackmount chassis
• High-quality components and exceptionally rugged construction ensure long life
• Conceived and designed by BEHRINGER Germany