Peavey EU 218 Sub

EU 218 Sub

The Peavey EU 218 Sub achieves astounding performance, compact size and light weight through a pair of 18″ neodymium-loaded loudspeakers arranged in a vented, isobaric chamber. For a subwoofer that produces massive low-end perforamnce in a smaller enclosure than a typical 1×18 sub, and up to 3,000 watts peak power handling, look no further!

Features

• 1500 Watts of program power rating
• Dual Peavey high performance 18″ Neo Woofers
• Vented cabinet with Isobaric chamber configuration
• Four-pin twist lock professional input connectors
• Compact light-weight design for a dual 18″ system
• Speaker pole mount built in
• Heavy-duty steel handles inset on both sides
• Durable GatorHyde(r) finish
• Full-length steel grille for speaker protection
• Weight Unpacked: 76.50 lb(34.7 kg)
• Weight Packed: 86.00 lb(39.009 kg)
• Width Packed: 26.875″(68.2625 cm)
• Height Packed: 29.25″(74.295 cm)
• Depth Packed: 24.625″(62.5475 cm)

DBX 234XL Stereo 2/3 Way, Mono 4-Way Crossover

• XLR balanced ins and outs
• Mode switches for mono 4-way or stereo 2-way/3-way operation
• Low frequency summed (subwoofer) output
• x10 range switch on both channels
• 40Hz high pass (low cut) filter both channels
• Phase reverse switch on all outputs
• Individual level controls on all band outputs
• 24dB per octave Linkwitz-Riley filters (the professional standard)
• Stereo/Mono status LEDs indicate the selected mode
• dbx® 2 year parts and labor as standard
• CSA NRTL/C approved
• CE compliant

SPECS  :

 INPUT

• Connectors: XLR
• Type: Electronically balanced/unbalanced, RF filtered
• Impedance: Balanced >50k ohm, unbalanced >25k ohm
• Max Input Level: >+21dBu balanced or unbalanced
• CMRR: >40dB, typically >50dB at 1kHz

OUTPUTS

• Connectors: XLR

DBX 2231 Graphic Equalizer/Limiter with Type III™

• Revolutionary instant encode/decode Type III® Noise Reduction in-circuit at the push of a button. Increases S/N ratio by up to 20dB
• Patent-pending PeakPlus™ Limiter threshold range from 0dBu to +24dBu (off) can transparently tame the wildest hits or the subtlest nuances of any signal
• Four segment LED bargraph for BOTH Gain Reduction AND Output Level
• Status LEDs offer visual feedback for all settings on the front panel

Specs:

INPUT

• Connectors: 1/4" TRS, female XLR (pin 2 hot), and barrier terminal strip
• Type: Electronically balanced/unbalanced, RF filtered
• Impedance: Balanced 40k ohm, unbalanced 20k ohm
• Max Input Level: >+21dBu balanced or unbalanced
• CMRR: >40dB, typically >55dB at 1kHz

OUTPUTS

• Connectors: 1/4" TRS, male XLR (pin 2 hot), and barrier terminal strip
• Type: Impedance-balanaced/unbalanced, RF filtered